Offices, homes, and roads are already being built sustainably. But clients want contractors to consider the environment even during construction. It's time for sustainable shovels and cranes.
They don't notice a thing, the players chasing a ball around the green at The Hague's Leeuwenbergh golf course. But thirty meters below their feet, an eighty-meter drill plows decimeter by decimeter through the ground – and into the future. Because by 2020, when the last construction worker closes the door of the shed behind them, the greenest traffic tunnel in Europe is to be built in The Hague's soil.
The Victory Boogie Woogie tunnel owes its status not only to the solar panels on the tunnel entrance and the service building, but also to the air conditioning system that captures particulate matter. Or to the special asphalt that makes the tunnel quieter.
Even during the tunnel's construction, significant efforts are being made to protect the environment. "For example, the drill we're using is a secondhand one," says Bramske van Beijma, responsible for greening the energy and water division of BAM Infra, one of the contractors on the Hague project. "We used it before during the construction of the Sluiskiltunnel in Zeeland. That saves us from having to build a new one." The drill bit is slightly larger than needed for the two tunnel tubes in The Hague, but that wasn't a problem.
The decision to run mobile construction equipment on cleaner fuel has a greater impact. Forklifts, bulldozers, cranes, and shovels
Excavators and excavators account for 8 percent of annual particulate matter emissions from traffic, 8 percent of the greenhouse gas CO2, and 12 percent of nitrogen oxides. To reduce this environmental impact, the "Het Nieuwe Draaien" (New Turning) initiative was conceived in 2016. It is one of dozens of Green Deals, a series of agreements signed by businesses, government, and environmental groups to promote sustainable initiatives.
The Rotterdamsebaan, a new stretch of highway near The Hague, which includes the Victory Boogie Woogie Tunnel, has been selected as one of the pilot projects. To meet the requirements of the New Way of Working, BAM is not using regular diesel in the tanks of the machines constructing the Victory Boogie Woogie Tunnel, but GTL. For this gas-to-liquid process, natural gas is converted into a liquid fuel through a chemical process. GTL is four to eight cents per liter more expensive than diesel. However, the synthetic diesel is estimated to lead to a 10 to 15 percent reduction in nitrogen emissions and a 20 to 30 percent reduction in particulate matter. No definitive conclusions can yet be made about the reduction in CO2 emissions. "So the impact is primarily local, for local residents," says Van Beijma.
Construction workers who drive diesel for work are also allowed to use GTL, although BAM Infra pays a slightly higher price. A Shell gas station has added the new fuel to its product range. "The advantage of GTL," says Van Beijma, "is that you don't need a new engine." This is important for the construction industry. While the average Dutch person can trade in their car every four years, construction machinery lasts ten to fifteen years.
The operators of these machines last even longer, and as with all professionals, energy-consuming habits creep into their behavior. At SOMA Bedrijfsopleidingen in Harderwijk, operators can learn how to work more efficiently and effectively. SOMA has a huge sandbox in Harderwijk, more than fifty football fields in size, surrounded by woods.
You have to prevent people from falling back into their old habits. Because then those expensive courses will have been for nothing.
Sytze Kloosterman of SOMA on monitoring course participants.
Here, students can put their knowledge to the test. The site features a handful of cranes, dozens of bulldozers and shovels, and a real pile driver. There's even an abandoned section of railway track, several dozen meters long, including a section with a slight incline, for practicing lifting rails and sleepers on curves.
For Sytze Kloosterman, account manager at Soma and a machinist for 30 years, there's little new about The New Way of Turning. He first taught a course on efficient and effective machine use fourteen years ago.
What began as a request from a private contractor in Nieuwegein for a one-day refresher course has grown into a certified program with practical training, a curriculum that operators complete online, and a "review" six months later. With this "review," the instructors assess whether the trainee is (effectively) putting what they've learned into practice. "You have to prevent people from slipping back into their old habits," says Kloosterman. "Because then those expensive courses will have been for nothing."
Operators are often suspicious of Kloosterman's message that they can save significantly by adjusting their working methods. "That's how I've been doing it for years," they quickly reply. Fortunately for Kloosterman, almost all rolling stock is equipped with an onboard computer, from which he can retrieve data such as operating hours, engine speed, and diesel consumption.
For example, one operator boasted that he used much less fuel than a colleague on the exact same machine: an average of 9 liters per hour compared to 12 liters. When the data was analyzed, it turned out that the one who seemed more efficient actually worked more hours and often let his machine idle, instead of shutting it down when there was nothing to do. The man who used 12 liters did, however. He worked less hours and was still more efficient in the end.
It's often small adjustments that allow operators to save fuel – clever tricks that can save their employers thousands of euros per machine annually. This can add up nicely for a fleet of dozens to hundreds of machines.
Another ingrained habit Kloosterman challenges is always running machines at the highest speed. "Most equipment is equipped with an eco button. Then you use three-quarters of the maximum speed. That's usually more than enough. Only for really heavy work do you need a higher speed." Kloosterman would like to see manufacturers make the economy mode the standard.
It's not just the machine drivers who need to be trained in different behavior. Kloosterman: "When a company hires us, I always insist that the planner and foreman also need to attend training. Take an asphalt paver, for example. It has a warm-up time of half an hour. Usually, that machine is turned on at the start of the workday. But if the asphalt isn't delivered half an hour later, it's pointless. So the planner has to check with the supplier when they can deliver, and the foreman has to check that same day to see if they can meet that time."